MB Quart Marine & UTV Subwoofer MBQX-SUB-2

2026-01-20T15:35:22-05:00

Type: marine subwoofer
Price: 599.99

MB Quart MBQX-SUB-2 Can-Am X3 Tuned Series - Stage 1 Audio System featuring a custom-fit subwoofer enclosure with MB Quart 10" subwoofer and 400-watt amp designed for select 2017-up Can-Am Maverick X3 models We are a MB Quart authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order! What's Inside? •MBQX-SUB-2: •Loaded 10" subwoofer enclosure w/ attached 20" wire harness •2 Mounting brackets •Three 6-1/2" strips of foam padding (3M adhesive backing) •Two 2" aluminum spacers •One 1/2" plastic spacer •Six 3/4" bolts •Two 1" Torx screws (T-30) •2 Nylock nuts •2 Large flat-washers •12 Small flat-washers •6 Lock-washers •NA2-400.1 Amplifier: •Mono amplifier (attached 7" 3-pin & 2-pin harnesses) •16" Power/ground harness (inline 30A ATC fuse) •16" 2-Pin speaker harness •Four 3/4" screws •4 Flat-washers •4 Lock-washers •Remote level control (attached 15.5' cable w/ Molex connector • Owner's Manual Durable High-density Poly Composite Made from rugged, durable high-density poly composite, the enclosure is finished in a black, textured coating that will match your Maverick perfectly. It's paintable, too, so you can customize it to suit your style. Mounting hardware and step-by-step installation instructions are included. This enclosure fit under either front seat of your Maverick and installs with simple hand tools in most cases. It's a great way to bump up the thump on your Maverick, whether you're using it as a primary or secondary sub. Hey, passengers like bass too, y'know! Give You the Low-end Thump You Crave If you want to really boost the bass performance in your Can-Am Maverick X3, check out this custom-molded subwoofer system from MB Quart. With a 10" subwoofer and a 400-watt Class D mono amplifier, this system will give you the low-end thump you crave from a package that's made for your Maverick. Specialized sub enclosure This enclosure is designed to conveniently fit beneath either front seat of your Maverick and can be installed using basic hand tools in the majority of instances. It provides an excellent means to enhance the bass in your Maverick, whether you're utilizing it as a primary or secondary subwoofer. After all, passengers appreciate a good bass experience too! SPECIFICATIONS FEATURES Features: Overview: The MB Quart Nautic MBQX-SUB-2 Can-Am Maverick X3 tuned package includes an NA2-400.1 400 x 1 (@2?) mono subwoofer amp for powering the included 10" dual voice coil subwoofer, that's designed to mount underneath the driver or passenger side front seat. Compatibility: The MBQX-SUB-2 audio package is designed specifically for installation in 2017-up Can-Am Maverick X3 vehicles. Installation: The MBQX-SUB-2 10" subwoofer enclosure is designed to mount underneath the driver or passenger side front seat (driver's side recommended). If installing the subwoofer and amp combo in a Can-Am Maverick X3 with an existing MB Quart Stage 2, 3, or 5 system, wiring and mounting hardware are provided with those systems to integrate the subwoofer and amp. Subwoofer: The included 10" subwoofer features a dual 4? voice coil design that's wired for 2?. The sub comes pre-mounted inside a ported, high-impact HDPE composite enclosure that's designed to mount underneath the driver's seat (recommended) or passenger's front seat. Powered by the NA2-400.1 400W amplifier, the subwoofer and enclosure combo can provide deep, powerful bass at high volume. NA2-400.1 Sub Amplifier: The MBQX-SUB-2 sound system includes an NA2-400.1 mono amplifier for driving the subwoofer's dual voice-coils. The Class-D amp outputs 400W @ 2 (200W @ 4?) and has a frequency response of 20Hz - 20kHz. The amplifier features conformal coated PC boards that resist corrosion from salt spray and moisture, and a Q-Stasis pre-amplifier stage that reduces incoming noise from a headunit, greatly improving sound quality. A dual coil Pulse-Width Modulated power supply keeps a constant steady voltage. The Class-D topology combined with aluminum heat sinks allows the amp to produce the maximum amount of power while keeping it cool. Mounting hardware is included for mounting the amp with the subwoofer enclosure. Specifications: Custom subwoofer enclosure with MB Quart 10" sub and amplifier Fits select 2017-up Can-Am Maverick X3 models 10" dual 4-ohm voice coil sub Handles up to 300 watts RMS (600 watts peak) NA2-400.1 mono amplifier Class D design Power at 2 ohms: 400 watts Power at 4 ohms: 200 watts Frequency response: 10-300 Hz Enclosure fits under either seat Easy, bolt-in installation Black textured finish matches Maverick's interior Made from durable, paintable HDPE IP67 waterproof Mounting hardware included UPC: 806576230885 Weight: 10 Authorized Internet Dealer Warranty: 2 Year(s) Warranty.This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization. Do you own this product? Write a review!