Kicker Marine Subwoofer 45KM102
The KICKER® KM 10-inch Marine Subwoofer is made to work perfectly in a sealed or ported enclosure.
ABOUT THAT BASS
- Two-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with KM subs.
FEATURES
Want setup help? Go to KICKERU for a free woofer and amplifier configuration app! *The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details.
Features
- Two-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Specifications
| Woofer(in,mm) | 10, 25 |
|---|---|
| Impedance (OHMS) | 2 SVC |
| Peak Power (watts, per ANSI/CTA-2031-A) | 350 |
| Recommended Amplifier Power (watts RMS) | 175 |
| Sealed Enclosure Volume Min-Max(ft³, L) | 1-2.4, 28.3-68 |
| Vented Enclosure Volume Min-Max(ft³, L) | 1.25-1.75, 35.4-49.6 |
| Frequency Response(Hz) | 30-500 |
| Mounting Depth(in, cm) | 5, 12.7 |
| Hole Diameter(in, cm) | 9-3/16, 23.2 |
| Outer Diameter(in, cm) | 10-11/16, 27.1 |
| What's in the Box | 1 - 10" Woofer 1 - Back gasket 8 - Mounting screws 8 - Mounting screw clips 1 - Manual |
