Wide Open Sound · Curated gear
Kicker Marine Amplifier 51KXMA15001
WOS Pick What this amp does in 10 seconds — expand for full specs.
- BrandKicker
- SKU51KXMA15001
- Channels1
Mei says"Match this amp to your speakers and sub. Wrong power or wiring = weak system — do it once, do it right."
The stuff you'll actually notice
- 1-channel platform.
Product description
Delivering the same power at 1 or 2 Ohms, the KXMA1500.1 is an efficient Class-D marine mono amplifier, powerful enough to run multiple KICKER Marine subwoofers at high volume.
BIG BUMP
- Ultra-Efficient Class D Design
- 2500 Watts of Dynamic Power
- Mono Amplifier
- Conformal-Coated Circuit Board
- KMBLC Remote Level Control Included
- Variable 24dB Crossover
- KickEQ+™ Variable 0-6dB Bass Boost
- Variable 10-80Hz Subsonic Filter
- RCA Pass Through Output
- REAL MARINE™ ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
Experience the perfect way to get really big bass on your boat! A mighty Class-D power plant, 24dB crossover and subsonic filter all help you dial in the best sound. Use the remote level control to adjust the bass right from the dash and connect the full-range RCA outputs to expand your system!
Want setup help? Go to KICKER U for a free woofer-and-amp configuration app!
This KXMA amplifier delivers as much as 1500+ watts at 1 Ohm stable. See below for more details.
Important Safety Information
When installing KICKER amplifiers (car or marine) in a boat or other vehicle/environment where flammable fuel vapors can accumulate rather than dissipate, you must use appropriate MARINE fuses, MARINE fuse holders, and MARINE wiring to minimize the risk of fire or explosion.
Specifications
| MODEL | KXMA1500.1 |
|---|---|
| KXMA1500.1 White Paper | 51KXMA15001-wp.pdf |
| KXMA1500.1 Dimensions | KXMA1500.1 Product Dimensions PDF |
| Power (watts/ch) 1 Ohm Mono (@ 14.4v, < 1%THD) | 1500x1 +/-10% |
| Power (watts/ch) 2 Ohm Mono (@ 14.4v, < 1%THD) | 1500x1 |
| Power (watts/ch) 4 Ohm Mono (@ 14.4v, < 1%THD) | 750x1 |
| Dynamic Power (watts) | 2500 |
| Frequency Response (Hz) | 10-160 |
| Signal-to-Noise Ratio (dB; A-weighted, re: rated power) | -95 |
| Signal-to-Noise Ratio (dB; 1W, A-weighted, CTA-2006) | -75 |
| Input Sensitivity | low level 125mV-5V; high level 250mV-10V |
| Crossover | variable LP, 40-160Hz, 24dB/octave |
| Subsonic Filter | variable 10-80Hz, 24dB/octave |
| KickEQ+™ Parametric Bass Boost | Boost – Variable 0-6dB Center Frequency – 20-80Hz Bandwidth 1-5 |
| Dimensions (in, cm) | H – 2-1/8, 5.5; W – 8-5/16, 21; L – 11-3/16, 28.4 |
| Remote Level Control | KMBLC included |
Power breakdown
Inputs, filters & control
Build, wiring & install
Protection & performance
Full specifications
| Amp Channels | 1 |
|---|
| Color / Finish | White |
|---|
Vehicle fitment
| Model | 51KXMA15001 |
|---|
Support & warranty
Need help choosing or installing?
We build indestructible, IP-rated systems for marine, motorcycle, UTV, and automotive. If you want a matched setup, we’ll guide you to the right gear the first time.
- Choosing a selection results in a full page refresh.
- Opens in a new window.