MB Quart Marine Speakers NF1-116B

MB Quart NF1-116B Nautic Series 6.5" 80W Peak Power Handling, 4-Ohms, 2-way Marine Speakers for boat

We are a MB Quart authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?

• 6.5" 2-way Marine Speakers (black)
• Owner's Manual

Poly Composite Frame

Poly Composite Frame: Composites add strength to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker and are weather resistant! High Energy Motor assembly: High energy iron ferrite magnet for higher output and smaller overall size.

High Temperature Voice Coil

6.5 inch Composite Poly Midrange: Water resistant composite polypropylene cone with temperature stable UV Butyl rubber surround mounted on a lightweight composite frame. High Temperature Voice Coil and Former: Voice coil is high temperature copper, wound on an aluminum former which allows the voice coil to handle more power while remaining light in weight.

 

 

SPECIFICATIONS

Diameter : 6.5 Inch

Sensitivity : 89 dB

Impedance : 4 Ohm

Frequency Response : 35-21000 Hz

Peak Power Handling : 80 Watts

Color : Black

RMS Power Handling : 40 Watts

FEATURES

Features:

Marine Grade ProtectionLife Shield: Protected For Water And Dirt. Uv Protected Against Sun Fade.
Tweeter Dome Material.75 Inch Composite Dome: Very Smooth Musical Response, High Output With Minimal Required Amplifier Power.
Speaker Surround: Butyl Rubber Remains Musical In All Weather And Does Not Stiffen In The Cold.
Cone Material: 6.5 Inch Composite Poly Midrange Water Resistant Composite Polypropylene Cone With Temperature Stable Uv Butyl Rubber Surround Mounted On A Lightweight Composite Frame.
Surround / Cone CouplingUv Butyl: Butyl Rubber Remains Musical In All Weather. Does Not Stiffen In Cold.
Voice Coil: High Temperature Voice Coil,  Voice Coil FormerHigh Temperature Voice Coil And Former Voice Coil Is High Temperature Copper, Wound On An Aluminum Former Which Allows The Voice Coil To Handle More Power While Remaining Light In Weight.
Spider: Woven Fiber Composite Spider To Stabilize The Cone And Voice Coil In All Musical Situations.
Cooling System: Front And Rear Venting Allows Air Passage Through The Spider And Back Plate To Exchange Air Over The Voice Coil.
Crossover6db High-pass: Clean And Simple Crossover Design Allows The Most Possible Signal To Get To The Speaker From Your Source Unit Or Amp.
FramePoly Composite Frame: Composites Add Strength To The Frame Without Adding Distortions Or Harmonics That Can Affect The Tonal Quality Of The Speaker And Are Weather Resistant!
MotorHigh Energy Motor Assembly: High Energy Iron Ferrite Magnet For Higher Output And Smaller Overall Size.
Tweeters: Composite Dome Tweeter Provides Very Smooth Musical Response, High Output With Minimal Required Amplifier Power.
Tweeter Surround Material: .75 Inch Composite Dome Tweeter  Very Smooth Musical Response, High Output With Minimal Required Amplifier Power.
Tweeter Hardware: Mounting Hardware Are Die Cast For Strength And Powder Coated To Resisted Outdoor Elements Of Sun, Spray And Dust.
GrillsComposite Integrated: Uv Treated Against Sun Fade And Waterproof And Are Integrated Into Speaker Frame For Simple Installation

 
Specifications:

Rms Power Handling: 40 Watts
Peak Power Handling: 80 Watts
Speaker Impedance: 4 Ohms
Frequency Response: 35 Hz - 21khz
Sensitivity: 89db
Crossover Slope: 12db
Mounting Diameter / Cut Out: 5" (128mm)
Outside Diameter: 7" (180.2mm)
Mounting Depth / Chassis Depth: 2.29" (58.3mm)
Hardware: Stainless Steel Screws
Ipx Rating

UPC: 806576231561
Weight: 10
Authorized Internet Dealer




Warranty: 2 Year(s) Warranty.This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.


Do you own this product?
Write a review!