Wet Sounds Marine amplifier SYN-DX Series SYN-DX4

Wet Sounds SYN-DX Series Marine Amplifiers are designed to be a complete solution for every type of extreme marine application. SYN-DX amplifiers use superior performance circuitry by utilizing Class D Power Supplies. These amplifiers have extreme power output packed inside a small chassis, thermal overload protection, flexible crossovers, extended inputs. SYN-DX amplifiers are a well balanced match for all of the Wet Sounds™ products.
If you want the best boat amplifier, our SYN-DX Wet Sounds amp series is packed with premium features that lesser amps can’t match. Designed to pump out the best sound in every kind of marine environment, SYN-DX features include:
Features
• Superior performance circuitry with class-D power supplies
• Extreme power output packed inside a small chassis
• Thermal overload protection
• Flexible crossovers
• Extended inputs
• SYN-DX amplifiers are a well balanced match for all of the Wet Sounds products.
• A smart microprocessor and conformal coated PCB board, meaning reliable power and great control
• Backed by Wet Sounds’ 2-year limited warranty to protect your investment
 




Stereo @ 4 Ohms:
125 x 4 watts RMS >1.0% THD


Stereo @ 2 Ohms:
200 x 4 watts RMS >1.0% THD


Mono @ 4 Ohms:
400 x 2 watts RMS >1.0% THD


ChannelsInput Sensitivity:
0.2 V - 6.0 V


Crossover Range High Pass:
50 Hz - 250 KHz 12dB/Octave


Crossover Range Low Pass:
50 Hz - 250 KHz 12dB/Octave


Channels:
4


Series:
SYN-DX


Frequency Response:
20 Hz - 20 KHz




What Is Not Covered

This warranty does not cover fading or discoloration caused by exposure to sunlight or chemicals such as ammonia, household bleach, or any cleaning material that contains abrasive substances. (For information on how to prevent fading or discoloration, consult for recommendations on cleaning products) Wet Sounds, Inc. does not cover the cost for removal and reinstallation of any kind. Additionally, shipping TO Wet Sounds, Inc. is covered by the purchaser This warranty is void and inapplicable if Wet Sounds deems that the product was abused or misused; including but not limited to Speaker product that has been improperly-powered (under or over powered), causing thermal (burnt voice coil) and/or mechanical failure (torn surrounds or spiders), damage caused by accident, mishandling, improper installation, negligence, normal wear and tear, excessive water or heat damage, freight damage or products that have been altered in any way. Product owned by anyone other than the original purchaser from an authorized Wet Sounds dealer. (The warranty is not transferable and will not apply to products purchased from unauthorized dealers.) Wet Sounds is not responsible for any damages to a consumer's boat or person from a product failure. The warranty is void if Wet Sounds deems the product was installed or used improperly. Wet Sounds shall not be responsible for any incidental or consequential damages, except to the extent provided (or prohibited) by applicable law. This warranty gives you specific legal rights, and you may also have other rights which vary from state.

What Wet Sounds, Inc. Will Do

Wet Sounds, Inc will repair any part of your product that proves to be defective in materials or workmanship. In the event repair is not possible, Wet Sounds, Inc will replace the product in question. If it is deemed necessary Wet Sounds, Inc. will either replace the entire product with a refurbished unit or it will be replaced with a model that is similar in price if that model is no longer available. Labor cost and materials needed to complete this service will be at no charge to the purchaser. Additionally, the cost of shipping TO the consumer is also covered under this warranty.

How to Obtain Warranty Service

Contact Wet Sounds, Inc. either by phone at 877-938-7757 or by email at WARRANTY@WETSOUNDS.COM. A service representative will assist you in the necessary actions to verify that the problem that you are experiencing is covered under warranty. If it is in fact a warranty issue, Wet Sounds will issue an RA number for tracking purposes and give instructions on sending the product in for evaluation. Wet Sounds, Inc. How State Law Applies This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Internet Warning

Wet Sounds, Inc. products sold on any non authorized web site or internet auction site are void of any and all manufacturer's warranty. Please contact Wet Sounds at 877-938-7757 or visit our web site at WWW.WETSOUNDS.COM to search for an authorized site and/or an authorized retailer near you.

Wet Sounds SYN-DX-4 4-Channel 200W RMS x 4 at 2 Ohms, Full Range Class-D Marine Amplifier

We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?

• 4-Channel amplifier
• (2) 30A ATO fuses (installed)
• Wet Sounds badge
• Owner's Manual

 

 

Complete Solution

The Wet Sounds SYN-DX-4 marine amplifier is a versatile and high-performance marine amplifier that is designed to give great audio quality and power in a marine setting. This amplifier, designed to resist the rigors of boating, offers dependable and outstanding sound output on your boat or watercraft.

Thermal Overload Protection

These amplifiers have extreme power output packed inside a small chassis, thermal overload protection, flexible crossovers, extended inputs. SYN-DX amplifiers are a well balanced match for all of the Wet Sounds™ products. The SYN-DX-4 provides powerful and clean music playback with a maximum power output of 800 watts.
It has a Class D amplifier design that provides excellent efficiency and low power consumption, making it ideal for naval electrical systems. The SYN-DX-4 has four channels that can be used to power multiple speakers or bridged to drive subwoofers.

Packed With Premium Features

It has gain settings that let you to fine-tune the audio output based on your tastes and speaker requirements. This marine amplifier is made of marine-grade materials and has conformal-coated circuit boards for protection against moisture, salt, and UV rays.
Its tough design provides longevity and dependability in the harsh sea environment. Furthermore, the SYN-DX-4 includes advanced protective features such as temperature protection, overload protection, and short circuit protection, guaranteeing that the amplifier stays safe and operational even in adverse conditions.

SPECIFICATIONS

Low Frequency Response : 50-250 Hz

High Frequency Response : 50-250 Hz

Number of Channels : 4

Frequency Response : 20-20000 Hz

Built In Crossovers : Yes

RMS Power Output : 4x200 Watts

Channel Separation : Yes

Color : Black

Amplifier Class : D

Promo : Yes

FEATURES

Features:

Superior Performance Circuitry: Equipped with class-D power supplies.
Extreme Power Output: Packed inside a small chassis for maximum efficiency.
Thermal Overload Protection: Ensures safety and longevity of the amplifier.
Flexible Crossovers: Allows for versatile audio configurations.
Extended Inputs: Provides enhanced connectivity options.
Perfect Match: Well balanced to complement all Wet Sounds products.
Advanced Smart Microprocessor: Ensures reliable power and great control.
Conformal Coated PCB Board: Offers durability and protection.

 
Specifications:

Stereo @ 4 Ohms: 125 x 4 watts RMS >1.0% THD
Stereo @ 2 Ohms: 200 x 4 watts RMS >1.0% THD
Mono @ 4 Ohms: 400 x 2 watts RMS >1.0% THD
ChannelsInput Sensitivity: 0.2 V - 6.0 V
Crossover Range High Pass: 50 Hz - 250 KHz 12dB/Octave
Crossover Range Low Pass: 50 Hz - 250 KHz 12dB/Octave
Channels: 4
Series: SYN-DX
Frequency Response: 20 Hz - 20 KHz

UPC: 814820022537
Weight: 8
Authorized Internet Dealer




Warranty: 2 Year(s) Warranty.This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.


Do you own this product?
Write a review!