Hifonics Marine Speakers TPS-CP80

Hifonics TPS-CP80 Thor Series 8" 90W RMS (180W Peak Power Handling) 2-way Wake Tower Compression Horn Speaker With Poly Cone, Each. Includes Mounting Hardware (Black)

We are a Hifonics authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?

•Coaxial Speaker System
•Owner's Manual

Marine Grade Protection

Marine Grade Protection: Marine/powersports Certified, Protected for Water and Dirt. Uv Protected Against Sun Fade, Tweeter Dome Material: 1 Inch Pure Titanium Compression Diaphram, Very Smooth Musical Response, With Very High Output With Minimal Required Amplifier Power, Compression Horn: Coincident Mounted Compression Horn, Overall Volume is Improved as Much as +5db Over Conventional Speakers, Wavelength Transparent Acoustic Lens Improves Midrange Frequencies Through the Cone, Longer Life Against Harsh Conditions. Protected Against Sun Fade With Uva Paint Coating. Conformal Coated Crossover Components Protect Against Fresh and Salt Water Spray as Well as Dust and Sand.

 

 

 

SPECIFICATIONS

Diameter : 8 Inch

Sensitivity : 92 dB

Impedance : 4 Ohm

Frequency Response : 20-24000 Hz

Peak Power Handling : 180 Watts

Design : 2 Way

RMS Power Handling : 90 Watts

FEATURES

Features:

Marine Grade Protection: Marine/powersports Certified 
Protected for Water and Dirt. Uv Protected Against Sun Fade.
Tweeter Dome Material: 1 Inch Pure Titanium Compression Diaphram 
Very Smooth Musical Response, With Very High Output With Minimal Required Amplifier Power
Compression Horn: Coincident Mounted Compression Horn 
Overall Volume is Improved as Much as +5db Over Conventional Speakers, Wavelength Transparent Acoustic Lens Improves Midrange Frequencies Through the Cone
Surround: Natural Butyl Rubber 
Remains Musical in All Weather. Does Not Stiffen in Cold.
Cone:6.5 Inch Composite Poly Cone 
Water Resistant Composite Polypropylene Cone With Temperature Stable Butyl Rubber Surround Mounted on a Lightweight Composite Frame
Voice Coil Former: High Temperature Voice Coil and Former 
Voice Coil is High Temperature Copper, Wound on a Kapton Former Which Allows the Voice Coil to Handle More Power While Remaining Light in Weight.
Spider: Water Resistant Spider 
Woven Fiber Composite Spider to Stabilize the Cone and Voice Coil in All Musical Situations.
Cooling System: Front and Rear Venting 
Air Passes Through the Spider and Back Plate to Exchange Air Over the Voice Coil.
Crossover Type: 12db Butterworth 
Smooth Transition From High to Lower Frequencies Remain Musicial and Not Harsh or Distorted
Frame:composite Abs and Glass Fiber Frame 
Composites Add Strenth to the Frame Without Adding Distortions or Harmonics That Can Affect the Tonal Quality of the Speaker
Motor: High Energy Y30 Motor Assembly 
High Energy Strontium Ferrite Magnet for Higher Output With Minimal Amplifier Power
Grills: Composite 
Uv Treated Against Sun Fade and Waterproof
Marine Certified: Yes 
Longer Life Against Harsh Conditions. Protected Against Sun Fade With Uva Paint Coating. Conformal Coated Crossover Components Protect Against Fresh and Salt Water Spray as Well as Dust and Sand.
Ipx67: Yes 
Tested to the Highest Marine and Motorsports Standards for Resisting the Elements
Tweeter Material: Titanium Dome Tweeter 
Very Smooth Musical Response, High Output With Minimal Required Amplifier Power
Marine Certified Crossover: Marine Certified Crossover 
Conformal Coated, Butterworth 12db Per Octave Crossover With Ptc (Positive Thermal Coefficient) Tweeter Protection
Illumination: Yes 
Hardwired Illumination for Traditional Hifonics Blue, Red or "Off".
Enclosure: Injection Molded Enclosure 
Heavy Duty Abs Cast Enclosure Provides Strength and Improved Bass Response With Increased Volume While Remaining Very Light Weights
Mounting System: Steel Reinforced 
The Mounting System Between the Pipe Mount and the Tower Enclosure Has an Internal Steel Mounting Plate for Additional Strength
Centering Ring: Yes 
Centering Ring Allows the Speakers to Tip Left/right When Mounted to an Arced Mount
Mounting Hardware: Powder Coated Die Cast Mounts 
Mounting Hardware Are Die Cast for Strength and Powder Coated to Resisted Outdoor Elements of Sun, Spray and Dust
Mounting Hardware Options: Flexible Mounting 
Eleven Mounting Hardware Options From 1.5" to 2.75” Included

UPC: 806576226826
Weight: 8.1
Authorized Internet Dealer




Warranty: 2 Year(s) Warranty.This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.


Do you own this product?
Write a review!