Wet Sounds Marine amplifier HTX-2

Wet Sounds™ Hydro-Tech™ X (HTX) Series Amplifier. Wet Sounds represents the ultimate in High Performance Marine Audio. Wet Sounds HTX Series Marine Amplifiers are designed to be a complete solution for every type of extreme marine application. HTX amplifiers use superior performance circuitry by utilizing Class D Power Supplies.
These amplifiers have extreme power output packed inside a small chassis, thermal overload protection, flexible crossovers, extended inputs. HTX amplifiers are a well balanced match for all of the Wet Sounds™ products.
We’ve engineered these amps not just to deliver great sound but to hold up to a demanding marine environment full of water, waves, vibrations, and sun. Completely sealed and saltwater-compliant, Hydrotech Marine amp features include:
Features
• Optimized performance circuitry, with class-D power supplies
• Extreme power output packed inside a small chassis
• Thermal overload protection
• Flexible crossovers and extended inputs
• High-mass heat sink
• Smart microprocessor for great electronic performance
• Supports Wet Sounds’ extensive CrossOver network
• Protected by our standard 2-year limited warranty so you can party with confidence
 
Our Hydrotech Marine amps offer value as great as their sound and give any boat an unbeatable Wet Sounds experience. If you’re looking for a great deal on an outstanding piece of marine audio amplification, Wet Sounds has you covered with the Hydrotech Marine Series. Order online or call today at 877-938-7757, and get the amplification to take your music to the next level.
 
 




Channels:
2-Channel


RMS Power @ 4 Ω Stereo:
150W x 2 @ < 1.0% THD


RMS Power @ 2 Ω Stereo:
300W x 2 RMS @ < 1.0% THD


RMS Power @ 4 Ω Mono:
600W x 1 @ < 1.0% THD


Frequency Response -3dB:
20Hz - 20kHz


Input Sensitivity:
Variable from 0.2V - 6.0V


S/N Ratio (Awtg):
>60dB (1W 4 Ω) | >99dB (125W 4 Ω)


Crossover Range Low Pass:
50Hz - 250Hz @ 12dB/Octav


Crossover Range Subsonic Filter:
50Hz - 250Hz @ 12dB/Octav


Remote Attenuation:
+0.7 - -29dB




What Is Not Covered

This warranty does not cover fading or discoloration caused by exposure to sunlight or chemicals such as ammonia, household bleach, or any cleaning material that contains abrasive substances. (For information on how to prevent fading or discoloration, consult for recommendations on cleaning products) Wet Sounds, Inc. does not cover the cost for removal and reinstallation of any kind. Additionally, shipping TO Wet Sounds, Inc. is covered by the purchaser This warranty is void and inapplicable if Wet Sounds deems that the product was abused or misused; including but not limited to Speaker product that has been improperly-powered (under or over powered), causing thermal (burnt voice coil) and/or mechanical failure (torn surrounds or spiders), damage caused by accident, mishandling, improper installation, negligence, normal wear and tear, excessive water or heat damage, freight damage or products that have been altered in any way. Product owned by anyone other than the original purchaser from an authorized Wet Sounds dealer. (The warranty is not transferable and will not apply to products purchased from unauthorized dealers.) Wet Sounds is not responsible for any damages to a consumer's boat or person from a product failure. The warranty is void if Wet Sounds deems the product was installed or used improperly. Wet Sounds shall not be responsible for any incidental or consequential damages, except to the extent provided (or prohibited) by applicable law. This warranty gives you specific legal rights, and you may also have other rights which vary from state.

What Wet Sounds, Inc. Will Do

Wet Sounds, Inc will repair any part of your product that proves to be defective in materials or workmanship. In the event repair is not possible, Wet Sounds, Inc will replace the product in question. If it is deemed necessary Wet Sounds, Inc. will either replace the entire product with a refurbished unit or it will be replaced with a model that is similar in price if that model is no longer available. Labor cost and materials needed to complete this service will be at no charge to the purchaser. Additionally, the cost of shipping TO the consumer is also covered under this warranty.

How to Obtain Warranty Service

Contact Wet Sounds, Inc. either by phone at 877-938-7757 or by email at WARRANTY@WETSOUNDS.COM. A service representative will assist you in the necessary actions to verify that the problem that you are experiencing is covered under warranty. If it is in fact a warranty issue, Wet Sounds will issue an RA number for tracking purposes and give instructions on sending the product in for evaluation. Wet Sounds, Inc. How State Law Applies This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Internet Warning

Wet Sounds, Inc. products sold on any non authorized web site or internet auction site are void of any and all manufacturer's warranty. Please contact Wet Sounds at 877-938-7757 or visit our web site at WWW.WETSOUNDS.COM to search for an authorized site and/or an authorized retailer near you.

Wet Sounds HTX-2 Hydro-Tech™ X (HTX) Series 2x300W RMS @2ohms Full Range Class D, 2-Channel High Performance Marine Audio Amplifier

We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?

•2-Channel marine amplifier
•(2) 30A ATO fuses (installed)
•2.5mm Allen wrench
• Owner's Manual

 

 

Hydro-Tech™ X (HTX) Series Amplifier

It represents the ultimate in High Performance Marine Audio. Wet Sounds HTX Series Marine Amplifiers are designed to be a complete solution for every type of extreme marine application. HTX amplifiers use superior performance circuitry by utilizing Class D Power Supplies. These amplifiers have extreme power output packed inside a small chassis, thermal overload protection, flexible crossovers, extended inputs. HTX amplifiers are a well balanced match for all of the Wet Sounds™ products.

Designed by Boaters for Boaters

Designed by boaters for boaters, Wet Sounds made this Hydro-Tech™ X amplifier to survive and thrive in the often-harsh marine environment. A conformal-coated circuit board, a sealed, salt-water resistant heat sink, and stainless steel hardware ensure that your amp will stand up to salt, spray, high temperatures, and high volume levels for seasons to come.

SPECIFICATIONS

Maximum Power : 600 Watts

Low Frequency Response : 50-250 Hz

Number of Channels : 2

Frequency Response : 20-20000 Hz

Built In Crossovers : Yes

RMS Power Output : 300x2 Watts

Channel Separation : Yes

Color : Silver

Amplifier Class : D

FEATURES

Features:

2-channel marine amplifier
Class-D design
150 watts RMS x 2 at 4 ohms (300 watts RMS x 2 at 2 ohms)
600 watts RMS x 1 at 4 ohms
high- and low-pass filters
rugged, water-resistant shell
removable speaker terminal blocks for easier installation
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
fuse rating: 30A x 2
frequency response: 20-20,000 Hz
dimensions: 9-9/16"W x 3-1/8"H x 7-3/16"D

 

Specifications:

RMS Power Output (Watts x Channels) 150 x 2
Frequency Response at Rated RMS Power 100Hz Hz
THD at Rated RMS Power 1%
Signal to Noise Ratio 90 dB
Input Voltage 14.4v
Peak Power Output (Watts x Channels) N/A
Power at 2 Ohms (Watts x Channels) 300 x 2
Bridged Power (Watts x Channels) 600 x 1
Minimum Impedance Bridged 4
Minimum Impedance Unbridged 2

UPC: 814820022179
Weight: 6
Authorized Internet Dealer




Warranty: 2 Year(s) Warranty.This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.


Do you own this product?
Write a review!